7
|
90
Use this document to install, operate and maintain your AQUIS™ foam
proportioning system. Please understand the following conditions before
continuing with the document:
•
The instructions may refer to options or equipment that you may not have
purchased with your system.
•
The graphics in this document are intended to illustrate concepts. Do not use
them to determine physical attributes, placement, or proportion.
•
Do not install this equipment if you do not have the necessary skills,
knowledge, and experience installing similar equipment.
•
The equipment described in this document is intended to be operated by a
person, or persons, with the basic knowledge of operating similar equipment.
•
Read and understand this document before installing or operating the
equipment. Contact Waterous for more information.
This document is divided into the following sections:
Safety
This section describes general precautions and alert symbols that are in this
document.
Introduction
This section is an overview of the document.
Product Overview
This section describes the parts and associated components that make up the
system.
Installation
This section describes the initial setup procedures
Operation
This section describes how to operate the equipment.
Maintenance
This section describes typical maintenance procedures.
Troubleshooting
This section provides information to troubleshooting system.
Service Parts
This section provides service part information associated with the system.
Using this Document
Use the guidelines below when viewing this document.
Viewing the Document Electronically
• View this document in landscape orientation.
• Use the table of contents to navigate directly to that section.
• Text
with this appearance
is linked to a reference.
Printing the Document
• The document is viewed the best when printed in color.
• The
print on both sides
and
flip on long edge
features can provide the
best results.
• Use a 3-ring binder to store the document.
Locating the Serial Number
Locate and record the model and serial number of the equipment in your
application. Have this information available when you call Waterous.
Typical Label Locations
Model number- Date-
Serial number-