Parts Overview
have been damaged in transport.
Your purchase should include the following parts:
2
Figure 4:
Parts Included
After unpacking the equipment, ensure all parts are present and check that none
Parts exclude a CO bottle*. Provided the supplied pressure regulator is installed,
2
C
O
CO
The ST2 tap is an optional substitute for the ST1 tap.
most CO
bottles can be used, including a regular SodaStream bottle however,
most
for better value and ease of use, we recommend using a 2.6kg bottle available from
sodatap.com.au or your local brewing supply store (where they can also be refilled).
The tubing included can be used for both CO
2
and water connections. It can be cut
to any length and the amount supplied is ample for regular installation.
Copyright Sodatap© 2023 Page 7 STM1 Manual V10
see note below ^
^ This appliance incorporates backflow protection complying with AS/NZS 3500.1 No further backflow protection required for
connection to the water supply.
^
*unless selected with your order
^ a 0.9kg bottle is also available if space is restricted
