23
FREQUENTLY-USED FUNCTIONS
Note:
The
default
setting
of
SS
is
03,
which
means
once
an
object
is
detected
in
more
than
3
grids,
the
system
will
get
triggered.
So
the
value
of
SS
must
be
less
than
the
number
of
grids
that
you
set
up
for
the
motion
detection
area
3)
TS (Time of Sensitivity)
The “TS” function sets the sensitivity regarding how long one object can stay in the
detection area before triggering the recording. The smaller the value, the higher the
sensitivity for motion detection. The highest sensitivity setting is 00, and the lowest
sensitivity setting is 15. The default setting is 02.
4) DET
Select if you want to activate the motion detection function for the selected channel
(ON/OFF).
5) ALARM
Select N.C/N.O depending on your installation need. The default alarm value is
OFF.
6) AREA
Click “EDIT” to set the motion detection area. There are 16 × 12 grids per camera for all
channels. Pink blocks represent the area that is not being detected while the transparent
blocks are the area under detection.
Summary of Contents for DVR4ENTPACK4
Page 36: ...36 REMOTE OPERATION ...
