8
CONNECTION AND SETUP
2. CONNECTION AND SETUP
Before the DVR is powered on, make sure you have installed a hard disk and connected at least
one camera. For details, please refer to the following sections.
Note:
The
DVR
is
designed
to
automatically
detect
the
video
system
of
the
connected
cameras
(NTSC
or
PAL).
To
make
sure
the
system
detection
is
correct,
please
check
if
the
cameras
are
connected
to
the
DVR
and
power
is
supplied
before
the
DVR
is
powered
on.
2.1 Camera Connection
The cameras must be connected and have power supplied to them before the DVR is
powered on. Connect each camera to the supplied splitter cable and connect the splitter cable
with the indicated power supply. Then, connect the camera video outputs to the DVR video
input ports with the supplied Video/Power cable. The connectors have been colour coded to
assist you in connecting the system.
Note:
For
detailed
DVR
video
input
ports,
please
refer
to
“1.3
Rear
Panel”
on
page
8.
Note:
For
detailed
camera
installation
and
connection,
please
refer
to
its
own
user
manual.
1) Connecting to DVR video input
Connect the camera video output to the DVR video input port with the Video/Power cable
with BNC connector.
2) Connecting to DVR audio input (Optional)
Connect the camera audio output to the DVR audio input port with a coaxial cable or
RCA cable with BNC connectors.
3) Connecting to power
Connect the camera to the power splitter cable and connect the splitter to the
indicated power supply.
Summary of Contents for DVR4ENTPACK4
Page 36: ...36 REMOTE OPERATION ...
