Doc. P/N:
WSP-009-008
Version: V1.3
Issue Date:
April 2014
68
6
Open the
Raw Info
display from the
Utility Panel
,
then the
Sensor Data
tab.
Confirm that the
Roll
,
Pitch
,
Heave
and
Heading
readings are all
active and correct
.
7
Click the
MODE
button to start pinging.
Confirm that the icon animates while pinging,
showing a pulse moving down from the vessel.
8
Switch to the
Sonar
display.
9
The Range Control might have locked on to an
incorrect depth. Adjust the
Range Control
dial so
that the returned signal from the seafloor can be
seen on the Sonar display.
Double-click on the range indicator to switch
between automatic range and manual range.
10
On the
Main Menu
, set the
Power Level
to
Automatic
.
Double-click on the power level indicator to
switch between automatic power and manual
power.
11
Cycle through each of the layouts for both the
Acoustic and Charting views, and confirm that they
all display and draw correctly.
