Doc. P/N:
WSP-009-008
Version: V1.3
Issue Date:
April 2014
56
8. Operating Procedures
1
T
urn
on
The
power
:
Press the
POWER
button on the BTxR.
The BTxR starts up and the
LED
glows
RED
.
Turn on the
WASSP Processor
.
In standard installations, the WASSP program starts
up automatically. The BTxR
LED
will turn
GREEN
once the program has initialised.
If no dongle is found, a
Dongle Error
message
appears on the screen.
The program then performs a self-calibration (
MODE
button turns
YELLOW
). When the button turns
BLUE
it is ready to go.
Ensure a dongle has been plugged into the WASSP
Processor’s USB port and click
Retry
. If this doesn’t
work, remove the dongle and try plugging it in again.
STATUS
POWER
You can click Cancel and run a demo file
from the Utility Panel.
2
T
ransmiT
, r
eceive
:
Click the MODE button to switch from STBY
(standby) to the transmit mode.
When transmitting, the transmit button animates
showing a pulse being transmitted from the vessel.
3
c
hoose
a
display
mode
:
Cycle through the display layouts to choose a display
mode you want to use. Left-click to cycle forwards,
right-click to cycle backwards.
4
c
usTomise
The
s
elecTed
d
isplays
:
Click the
icon in the top-left corner of each
display to open the menu for that display.
Select any options you require.
5
p
erform
any
seafloor
profiling
operaTions
you
require
