Setup
16
Wasp WDI7500/WWS750
Mounting with the Metal Plate
1. Affix the metal plate onto the desired mounting surface using the two
center screw holes (see Figure 1 on page 4).
2. Slide the tabs on the back of the cradle onto the metal plate as shown
in Figure 1.
3. After aligning the tabs, push up to lock into place.
Figure 6. Mounting Plate on Wall
System Connections
CAUTION
Connections should always be made with power off!
The WWS750-BS Base Station provides a multi-interface connector and a
power supply connector as shown:
Power Supply
Multi-Interface
Connector
