166
Wasp WDI7500/WWS750
2D SYMBOLOGIES
2D Global Features
2D Structured Append on page 168
The reader supports the following 2D symbologies (barcode types). Symbol-
ogy-dependent options for each symbology are included in this chapter. See
for configuration of 1D barcodes.
China Sensible Code on page 172
Postal Code Selection on page 195
Digital Watermark Reading on page
Digimarc Compatibility Mode on
2D Global Features
The following features are common to all, or in some cases, most of the
available 2D symbologies. Default settings are indicated at each feature/
option with a green arrow. Also reference
for
a listing of the most widely used set of standard factory settings. That sec-
tion also provides space to record any custom settings needed or imple-
mented for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING barcode at the top of applicable
programming pages.
2. Scan the correct barcode to set the desired programming feature or
parameter. You may need to cover unused barcodes on the page, and
possibly the facing page, to ensure that the reader reads only the bar-
code you intend to scan.
3. If additional input parameters are needed, go to
,
and scan the appropriate characters from the keypad.
Additional information about many features can be found in the “Ref-
erences” chapter.
If you make a mistake before the last character, scan the CANCEL bar-
code to abort and not save the entry string. You can then start again
at the beginning.
Complete the programming sequence by scanning the ENTER/EXIT PRO-
GRAMMING barcode to exit Programming Mode.
