Mounting the WWS750-BS Cradle
Product Reference Guide
17
Connecting and Disconnecting the Interface Cable
The WWS750-BS can be connected to a Host by means of a multi-interface
cable, which must be simply plugged into the Host connector, visible on the
front panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the
hole corresponding to the Host connector on the body of the cradle. Push
down on the clip while unplugging the cable. Refer to the following figure:
Connecting/Disconnecting the Cable
RS-232
USB
The power supply is required only if you need to connect the interface
cable to a standard USB Port. The power supply is not required if you con-
nect the interface cable to a Powered USB 12V or 24V port.
