Wasp Wasp WDI7500 Product Reference Manual Download Page 73

Page: 73 / 310

Label ID

Enter/Exit Programming Mode

Product Reference Guide

Advanced Formatting: User Label Edit

Advanced formatting is available to create user label edit scripts.Contact

Wasp Technical Support.

Case Conversion

This feature allows conversion of the case of all alphabetic characters to

upper or lower case.

DEFAULT

$CLFCA00(CR)

Case Conversion = Disable (no case conversion)

$CLFCA01(CR)

Case Conversion = Convert to upper case

$CLFCA02(CR)

Case Conversion = Convert to lower case

Case conversion affects ONLY scanned barcode data, and does not affect
Label ID, Prefix, Suffix, or other appended data.

Summary of Contents for Wasp WDI7500























































































































































































































































































































Search results

Summary of Contents for Wasp WDI7500

Reviews:

Related manuals for Wasp WDI7500

Brands by name

Popular brands

Wasp Wasp WDI7500, Product Reference Manual

Search results

Summary of Contents for Wasp WDI7500

Reviews:

Related manuals for Wasp WDI7500

Brands by name

Popular brands