Wascomat EX618, Service Manual

Page: 49 / 142

49
Program unit
SHOW TEMP
Select whether the current water temperature is to be shown on the dis-
play window while a wash program is in progress. This function cannot be
shown on the display at the same time as the SHOW IS LEVEL function,
only one of the functions can be shown at one time.
Yes =
The water temperature is shown.
No =
No temperature is displayed in the display window.
SHOW IS LEVEL
Select whether the current water level is to be shown on the display win-
dow while a wash program is in progress. The level is shown in divisions.
This function cannot be shown on the display at the same time as the
SHOW TEMP function, only one of the functions can be shown at one
time.
Yes = The water level is shown. (replaces temperature display in display
window)
No = No level is displayed in the display window.
MACHINE HEATED
Select whether the machine is to wait until a programmed temperature has
been attained before the wash time starts being counted.
Yes = The programmed temperature must be attained
No = The washing time is counted down as soon as the washing module
has been started.
HEATING RELAY ON
Select whether the heating contactor should activate or not when the hea-
ting starts.
Yes = The heating contactor will cut in when the heating starts. This is
the normal process for heated machines.
Note!
The heating contactor will also cut in on machines that are con
figured as unheated, if YES has been answered for this configu-
ration.
No = The heating contactor will not cut in. Used on unheated machines
that are fitted with heating contactors (machine changed from
heated to unheated).