manualshive.com logo in svg

WAREMA WMS, Operating Instructions Manual, Page: 92 / 132

Share
Download
WAREMA WMS Operating Instructions Manual Download Page 92

890405_d•en•2015-12-01

We reserve the right to carry out improvements

92

WMS Central transmitter

Menu item

Setting range Description

Measure value, inside 

temperature

The measured value is loaded from the 

actuator when the [

Settings

] menu is 

opened. To refresh the display, close the 

[

Settings

] menu and open it again.

NOTE

 

"Central command ON/OFF" is not supported by the system at this time.

9.1.3.8  Central command

  This menu currently has no function.

Menu item

Setting range Description

Central command ON/

OFF

 

Defines whether the product responds to a 

central command or not

Measured value, central 

command

The measured value is loaded from the 

actuator when the [

Settings

] menu is 

opened. To refresh the display, close the 

[

Settings

] menu and open it again.

NOTE

 

"Central command ON/OFF" is not supported by the system at this time.

9.1.3.9  Safety contact

  This menu currently has no function.

Menu item

Setting range Description

Safety contact ON/OFF

 

Defines whether the product responds to 

the state of a safety contact or not

Measured value, safety 

contact

The measured value is loaded from the 

actuator when the [

Settings

] menu is 

opened. To refresh the display, close the 

[

Settings

] menu and open it again.

NOTE

 

"Central command ON/OFF" is not supported by the system at this time.

9.1.3.10 Uime switch

Menu item

Setting range Description

Time switch ON/OFF

 

Activate/deactivate the function

Active/inactive when 

absent

 

The automatic control function depends on 

the "absent" variable

Switch time 1 Monday

00:00...23:59 

- - -

Adjust the switch time, - - - deactivates the 

switch time

Position

0...100 %

Position to which the product is moved at 

the switch time

Slat angle

-180...180°

Slat angle to which a slat product is moved 

at the switch time

Comfort functions

Enable, 

disable, un-

changed

Here you can activate or deactivate the 

comfort functions at the switch time

Switch time 2 Monday

00:00...23:59 

- - -

Adjust the switch time, - - - deactivates the 

switch time

Position

0...100 %

Position to which the product is moved at 

the switch time

Main menu

 

System

  

Products

    

Product type

 

   

Channel x

 

    

Settings

 

     

Central command

Main menu

 

System

  

Products

    

Product type

 

   

Channel x

 

    

Settings

 

     

Safety contact

Main menu

 

System

  

Products

    

Product type

 

   

Channel x

 

    

Settings

 

     

Time switch

System

Summary of Contents for WMS





































































































































Reviews:

No comments