890405_d•en•2015-12-01
We reserve the right to carry out improvements
11
2.5 Working safely
When you commission units or WMS products with the WMS Central trans-
mitter or perform work on the sun shading systems:
WARAIAN
The electrical installation must be performed by a certified electrician in
accordance with the electrical installation regulations published by the
Association of German Electrical Engineers (VDE 0100) or the standards
and regulations of the country in which the device is being installed. The
specialist must observe the installation instructions included with the
electrical device.
If you want to perform work on motor-operated windows or building façades
where motor-operated sun shading products are installed, then
Switch the system to a de-energised state.
Make sure that the unit has been sufficiently secured against unauthorised or
unintentional reactivation.
In any case, use suitable safety devices for personal protection.
Never place or store any items in the motion area of automatically operated
mechanisms (e.g. ladder against a house wall with an articulated arm awn-
ing).
WARAIAN
Dangerous situations, malfunctions and property damage to the unit
may result from improperly executed mounting, connection, repair or
maintenance work.
Such work may only be carried out by the service department or by author-
ised qualified personnel.
Only use such spare/replacement parts for maintenance or repair work as
have been approved by the manufacturer of the unit.
WARAIAN
Dangerous situations, malfunctions and property damage to the unit may
result if connections are disconnected during operation! All connections
are required for proper operation of the control.
Therefore, switch off the entire system before attaching or detaching connect-
ing lines.
WARAIAN
Danger to life and risk of property damage through sudden movement of
the mechanism!
2.6 Additional documents
These instructions contain the information needed to operate the WMS Cen-
tral transmitter. The following documents are available in addition to these
instructions:
Document
Number
WMS application brochure
890407
Safety instructions