890405_d•en•2015-12-01
We reserve the right to carry out improvements
17
4.2 Menu elements
An overview of the menu elements is provided below. The menus are gener-
ally structured as shown in the following example.
Fig. 6
Menu elements
The date and time are shown in the
header
. Below this you can see the
menu in which you are currently located. If you are located in a submenu, the
Back arrow appears on the left side. The button next to this can be used
to return to the higher level menu. Status information appears on the right
under the time. During normal operation, the charge status of the batteries
appears here.
In the middle below the header are five
menu lines
; each line represents
a value (submenu, setting, product, channel, etc.). If values can be set, the
menu lines have two columns: The
designation
of the setting value is shown
in the left column, and the
current value
is shown in the right column (sym-
bol or number). The selected menu line is highlighted in colour.
If the setting in the right column is
grey
instead of
white
, this setting cannot
be selected because it would not be applicable to the set product or is a
safety function that can only be changed after a password is entered. Also,
no buttons are enabled for locked functions.
The grey areas on the sides of the screen contain the functions of the menu
buttons, which depend on the current menu. Only those symbols and func-
tions are displayed that are useful in the current menu for the current device
status. The buttons on the left side are primarily used for navigation in the
menus (scrolling up and down, selecting menu lines, etc.). The buttons on
the right side are usually used to enter the values or operate the products.
Different operating options are available depending on the product type. You
can operate a product by directly activating the buttons next to the displayed
symbols (e.g. UP - STOP - DOWN, if the
,
and
symbols are visible).
When you open the product menu, you can also enter values (e.g. roller shut-
ter 70% closed). When the setting is confirmed with
ok,
the product automati-
cally moves to this position.
Introduction