890405_d•en•2015-12-01
We reserve the right to carry out improvements
10
WMS Central transmitter
2.3 Uarget group
These instructions are addressed to persons operating, adjusting or commis-
sioning the control unit.
WARAIAN
Commissioning or operation by insufficiently qualified and knowledgeable
persons may cause serious damage to the system or may even result in
personal injury.
Commissioning may therefore only be performed by properly trained and
qualified specialists. These specialists must be able to recognise sources of
danger that may be caused by the mechanical, electrical or electronic equip-
ment.
These qualified specialists must know and understand the content of the
present instructions and the instructions of the individual WMS products.
2.4 Retrofitting and
modifications
We design and build the WMS products with reliability and safety in mind. All
required settings are made when the unit is first commissioned. Modification
of the unit parameters is therefore only required when the characteristics of
the control need to be adjusted, changes are made to the sensor equipment
or the control itself is replaced.
WARAIAN
Retrofitting and modifications may impact the safety of the system or
reduce its effectiveness. Possible consequences may include death,
serious or light injuries, property or environmental damage.
Therefore, contact us or your specialist dealer before retrofitting or changing
the system or the unit parameters if you cannot find information on the cor-
responding topic in the control unit documentation. This is the only way to
ensure trouble-free retrofitting/modification.
Exercise special care when components of different versions are combined
or when existing components are replaced by older/newer products with a
different scope of functions or a different software version.
Safety instructions