890405_d•en•2015-12-01
We reserve the right to carry out improvements
20
WMS Central transmitter
4.3 Operating the
products
The product type determines the available functionality when operating the
product connected to the WMS Plug receiver. It is specified when learning
the plug receiver into a WMS transmitter.
NOTE
Once the product type has been selected, it can no longer be changed di-
rectly. To program a WMS Plug receiver for another product type, the receiver
must be deleted out of the network entirely and learned in again.
CAAUIOA
When learning in, it is important that you select the product type of the
connected product. Selection of the wrong product type can lead to
malfunctions and may result in damage to the connected product.
Product type
Functionality
External venetian
blind
Inside venetian blind
Inside
vertical lou-
vre blind
Short: The slats tilt up
Long: The product moves up
The product stops
Short: The slats tilt down
Long: The product moves down
Short: The product moves to the stored comfort
position
Long: The comfort position for the product is
stored
Roller shutter
Inside pleated blind
Inside roller blind
The product moves up
The product stops
The product moves down
Short: The product moves to the stored comfort
position
Long: The comfort position for the product is
stored
Awning
Awning with integr.
wind sensor
Conservatory
awning
Facade awning
Drop-arm
awning
Vertical awning
Markisolette
Awning without valance roller blind drive
The product moves up/retracts
or arrow button in opposite direction:
The
product
stops
The product moves down/extends
Short: The product moves to the stored comfort
position
Long: The comfort position for the product is
stored
NOTE
The STOP button also deactivates the wind
evaluation for one minute.
Introduction