W&H Lyla Instructions For Use Manual Download

Page: 36 / 122

Managing printers

Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl

CONTENTS

This section deals with the following subjects:

Printer selection (optional)

Label printer selection (optional)

Label printer usage (optional)

Label content description

Printer selection (optional)

SELECT THE PRINTER

Note

: the sterilizer only supports the specific printer models available

through manufacturer/distributor.

On the homepage, tap

Tap the model of the printer to use.

Tap

to confirm and go back to the previous page.

Label printer selection (optional)

FUNCTION AVAILABILITY

The first time you access the

Label Printer

(

) menu, you will be

requested to enter an activaction code. To require the activation
code, please refer to the activation code instructions provided with
the label printer.

LABEL PRINTER SETUP

Labels can be printed by a local label printer. The local label printer
is connected to the sterilizer.

SELECT AND CALIBRATE A LOCAL LABEL PRINTER

On the homepage, tap

Tap

: the local printer is located automatically.

Tap

to center the printout properly in the label area.

Tap

to print a test label.

If the printout is not duly centered, tap

to center it

horizontally (x) and vertically (y).

If necessary, tap

to print another test label and repeat step

Summary of Contents for Lyla



























































































































Search results

Summary of Contents for Lyla

Reviews:

Related manuals for Lyla

Brands by name

Popular brands

W&H Lyla, Instructions For Use Manual

Search results

Summary of Contents for Lyla

Reviews:

Related manuals for Lyla

Brands by name

Popular brands