W&H Med lina Instructions For Use Manual Download Page 96

Page: 96 / 114

Technical data

WATER SUPPLY SYSTEM

Temperature

max. 35 °C (95 °F)

Pressure

min. 2 bar – max. 8.6 bar (min 29 psi - max. 124.7 psi)

Flow

min. 0.25 – max. 0.5 l/min (min. 0.066 - max. 0.132 gal/min)

POWER SUPPLY SYSTEM

Nominal voltage and Max.
current

200–240 V ac (±10%), 50 Hz, 10 A, single-phase

200–240 V ac (±10%), 60 Hz, 10 A, single-phase

Overvoltage category

Protection required

Suitable circuit breaker and a Ground Fault Circuit Interrupter (GFCI).
All protection devices must be certified according to applicable
standard. A grounded connection is essential.

Communication with other
devices

1 USB port in the front

1 USB port at the rear (optional)

Features

Fully micro-processor controlled, process evaluation system
according to EN13060.

Programmable standby mode.

Max. heat output

3000 kJ/h

INSTALLATION REQUIREMENTS

Working temperature

From +5 °C to +40 °C (from +41 °F to +104 °F)

Working relative humidity

Max. RH 80% up to 31 °C (88 °F), linearly decreasing to 50% at 40
°C (104 °F)

Storage temperature / rel.
humidity

From -20 °C to +60 °C (from -4 °F to +140 °F )/0–90 % (with empty
tanks)

Max altitude

3000 m asl

Min. atmospheric pressure

0.6 bar (8.7 psi)

Overall dimensions

W: 465 mm/H: 452 mm/D: 646 mm (W: 18.3"/H: 17.8"/D: 25.4")

Min. space required

W: 485 mm/H:502 mm/D:439 mm (W: 19,1"/H: 19,8"/D: 17,3")

Size of the door movement

W: 532 mm/H: 443 mm/D: 357 mm (W: 21"/H: 17,5"/D: 14")

Weight empty

LINA 17: 40 kg (88.2 lbs)

LINA 22: 42 kg (92.6 lbs)

Max. weight (fully loaded)

LINA 17: 54 kg (119 lbs)

LINA 22: 56.5 kg (124.6 lbs)

Weight per support area

LINA 17: 32 kN/m

LINA 22: 33.5 kN/m

Environment pollution

Degree 2

Usage environment

Indoor

STERILIZER CHAMBER

Pressure safety valve

2.6 bar (37.7 psi)

Safety thermostats

180 °C (356 °F)

Total volume

LINA 17: 17 l/Ø: 250 mm/D: 362 mm (4.5 gal, Ø: 9.8’’/D: 14’’)

LINA 22: 22 l/Ø: 250 mm/D: 440 mm (5.8 gal, Ø: 9.8’’/D: 17’’)

Usable space *

LINA 17: W: 195 mm/H: 195 mm/D: 312 mm (W: 7.7’’/H: 7.7’’/D:
11.7’’)

LINA 22: W: 195 mm/H: 195 mm/D: 400 mm (/W: 7.7’’/H: 7.7’’/D:
15.4’’)

Bacteriological filter

0.3 µm

Note*: Usable space with standard rack and trays. With optional racks and

Summary of Contents for lina



















































































































Search results

Summary of Contents for lina

Reviews:

Related manuals for lina

Brands by name

Popular brands

W&H Med lina, Instructions For Use Manual

Search results

Summary of Contents for lina

Reviews:

Related manuals for lina

Brands by name

Popular brands