W&H Med lina Instructions For Use Manual Download Page 22

Page: 22 / 114

Getting started

Icon

Label

Function

Connectivity

Opens the pages to manage the network connection.

Ethernet

Manages the Ethernet network.

Eliso Status

Only if this service is supported in your Country, and if the
sterilizer is connected to it. Shows the status of the
connection with the W&H monitoring server.

Akidata
status

IoDent

WI-FI

Activates a communication protocol between the
sterilizer and an external gateway to extend connectivity
features.

Network
Status

Only with a network connection set. Provides information
about the network status.

Remote data
storage

Only with a network connection set. Opens the page to
manage the remote storage.

Settings

Only with a network connection set. Sets the parameters
of the network location.

Icon

Label

Function

Save all

Only with a network connection set. Copies all the files in
the specified location in the network.

Test

Only with a network connection set. Checks if the files can
be copied to the specified location.

USB options

Enables/disables USB warning messages.

Traceability
settings

Chooses if the sterilizer is master or slave.

TRACEABILITY MENU FUNCTIONS

Icon

Label

Function

Cycle History

Shows all the sterilization cycles and tests and prints
reports and labels.

Save

Saves all the sterilization cycle reports in the USB pen
drive.

User
Management

Optional, activated with an activation code. Permits
manage the users.

Add User

Administrator only. Adds a user.

Summary of Contents for lina



















































































































Search results

Summary of Contents for lina

Reviews:

Related manuals for lina

Brands by name

Popular brands

W&H Med lina, Instructions For Use Manual

Search results

Summary of Contents for lina

Reviews:

Related manuals for lina

Brands by name

Popular brands