LINA | Instructions for Use | RIK-1 Med ENG Rev03 | 11/05/2020 | © 2020 W&H Sterilization Srl
27
Getting started
Sterilizer setup
SET THE LANGUAGE
1
On the homepage tap
>
>
>
2
Tap the language you prefer.
3
Tap
to confirm: a confirmation message requiring the
restarting of the sterilizer appears.
4
Turn the sterilizer OFF and then ON.
SET THE DATE AND TIME
To change the current date and time:
1
On the homepage tap
>
>
>
2
Tap the value you want to change (time, date, format): the
highlighted value can be changed.
3
Tap
or
to change the value.
4
Tap
to confirm and go back to the previous page.
SET THE STERILIZER NAME
To change the sterilizer name that appears in the cycle reports:
1
On the homepage tap
>
>
>
2
Tap the text box: a keyboard appears.
3
Enter the new sterilizer name.
4
Tap
to confirm.
5
Tap
to go back to the previous page.
SET THE DISPLAY BRIGHTNESS
To change the display brightness:
1
On the homepage tap
>
>
>
2
Tap
or
to change the value.
3
Tap
to confirm and go back to the previous page.
CONNECT TO A NETWORK
If you connect through an Ethernet cable, in most cases the
sterilizer will connect to the network automatically. If it does not
connect automatically, or if you are using a Wi-Fi dongle key, follow
the following procedure under supervision of your IT manager /
network administrator.
Summary of Contents for lina
Page 1: ...RIK 117 RIK 122 Instructions for Use RIK 1 Med ENG Rev03 ...
Page 2: ......
Page 113: ......
