W&H Med lina Instructions For Use Manual Download Page 10 | Manualshive

Page: 10 / 114

background image

10

LINA | Instructions for Use | RIK-1 Med ENG Rev03 | 11/05/2020 | © 2020 W&H Sterilization Srl

Safety information

TAMPERING

n

Do not remove the name plate or labels from the
sterilizer.

n

Repairs, maintenance or service must be carried
out by authorized service providers always using
genuine spare parts.

REQUIREMENTS

n

Use only the power cord set and accessories
provided by the manufacturer.

n

In case of malfunction of the sterilizer, contact
an authorized technician or the manufacturer.

CYBER SECURITY

In order to improve the IT security of the system, a firewall
(iptables) is installed in the system and protects the security of the
device from external attacks.

It is recommended not to leave the machine unattended.

Note: a list of security information is mentioned in the MDS2 document,
which is available on request.

Responsibility

USER RESPONSIBILITY

n

The user is responsible for the proper installation, the correct
use and maintenance of the sterilizer in accordance with these
Instructions for Use.

n

The safety devices of the sterilizer are impaired when the
product itself is not installed, used and serviced in accordance
with these Instructions for Use.

n

The Instructions for Use updated to the latest version is
always available at www.wh.com.

n

Keep these Instructions for Use for future reference.

MANUFACTURER RESPONSIBILITY

n

The manufacturer can only accept responsibility for the safety,
reliability and performance of the product when the product
itself is installed, used and serviced in accordance with the
Instructions for Use.

n

Servicing by unauthorized persons invalidates all claims under
warranty and any other claims.

«
...
8
9
10
11
12
...
»

Summary of Contents for lina



















































































































Reviews:

No comments

Related manuals for lina

Brand: Keithley Pages: 149

Brand: Xoop Lighting Pages: 20

Brand: Vari Lite Pages: 132

Brand: Rapid Technic Pages: 152

Brand: PANDROL Pages: 36

Brand: Nektar Pages: 3

Brand: Youkey Pages: 86

Brand: Eaton Pages: 2

Brand: Eaton Pages: 20

Brand: Gaspardo Pages: 196

Brand: RAB Pages: 2

Brand: Madrigal Pages: 5

Brand: MacDon Pages: 504

Brand: Vahle Pages: 36

Brand: Vahle Pages: 20

Brand: Vacon Pages: 102

Brand: Harken Pages: 4

REBOUND DUAL ST

Brand: Össur Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands