Walther prazision 91489, Working Instruction

Page: 28 / 191

Working instruction
english
typ 91489
Description of installation
28
14-16) Deleted.
17. Insert socket/pin insert into the housing part according to the colour marking.
In doing so hold on contacts and push back cable so far through the screwed
cable gland that a small overlength remains in the plug housing and/or no
sideways tension comes on contacts.
18. Fasten socket insert holder with4 countersunk head screws M5 with a
hexagon screw driver SW3.
19. Tighten screwed cable gland so that sealing and internal cable tension relief
becomes effective.
20. Sideways sliding in of the electro plugs into the guide of the tool changer plate
until it matches with the pin bores.
21. Beat in and counterbore parallel pins from inside through plate and electro plug.
7.6 Installation of combined plugs (screwed cable gland Pg 29 ... Pg 9)
The combination plug can hold in its housing max. 2 different or same contact inserts up
to size 3. (A 3
rd
contact insert can be fitted with the mounting housing.)
The contact inserts are taken up in separate insert holders and can be shielded separately.
Due to openings of the housing the connection can be carried out with separate cables
or with a common hybrid cable (max. cable-Ø 28 mm).
Connection of a signal plug insert
See item 7.4.4.2. – Installation sequence
Caution:
During installation process T) take care that the sealing ring
item 18 and/or 36 is inserted!
Connection of a power plug insert
See item 7.4.4.2. – Installation sequence
Caution:
Metal housing is to be included in the protective measure!
Earthing at pin/socket insert holder (cover) up to 1,5 mm
2
.
Earthing at the electro plug housing part up to 6 mm
2
.
Caution:
During installation process T) take care that the sealing ring
item 18 and/or 36 is inserted!