Walther prazision 91489, Working Instruction

Page: 15 / 191

Working instruction
english
typ 91489
Description of equipment
15
6.2 Application: control current
Type Number
of poles
assembly
group III
Rated
voltage
Rated
current
contacts
Connection
cross
section
Connection
Cable-
Ø
Housing
material
Contact
material
95285
-Z02 36 + PE
24 + PE
27 250 V
250 V
24 V 16 A
16 A
16 A 1.5 mm
2
1.5 mm
2
1.5 mm
2
Pg 29
(Pg 9)
Pg 29
(Pg 9)
Pg 29
(Pg 9) 24 28
24 28
24 28 POM
(Al) Silver
plated
Extras: - hand connector 25-way with HAN mounting housing
- hand connector 26-way to MIL 26482instead of Pg 29
- 2 x Pg 29
- electro plug shielded for bus data, contacts gold plated
6.3
Application: power current and control current combination ("servo guns") in
combined plug housing
Type Number
of poles
Assembly
group III
Rated
voltage
Rated
current
contacts
Connection
cross section
Connec-
tion
Cable-
Ø
Housing
material
Contact
material
95285
-Z13 36 + PE
6 + PE 250 V
400 V 16 A
21 A 1.5 mm
2
2.5 mm
2
Pg 29/
Pg 21
Pg 29/
Pg 21 AL silver
plated
Extras: - electro plug shielded; contacts gold plated
- variable number of poles up to 36 +PE of each contact insert
- variable cable entry
- integrable connection block for sensors and actuators
Tool changer can be provided with different modules/equipment packages.
An operative unit with adjusted signal transmitters for the inquiry of the plunger position (lock)
results from the modules no. 0 and no. 2.
The basic module no. 1 must not be operated without signal transmitters, damage danger!
6.4 Funktions- und Basis-Module
Lfd. Nr.
Mechnik-Module
Pakete
1 1-91489-B-FT500-....-Y10 Basismodul Roboterseite
2 1-91489-B-LT500-....-Y10 Basismodul Werkzeugseite