fi
g.
1
fi
g.
2
7
Getting Started
Inserting Batteries in the Remote Control
• Remove the battery cover located on the back of
the remote control by gently pulling backwards from
the indicated part.
• Insert two AAA/R3 (2 X 1.5Volt) or equivalent type
batteries inside. Place the batteries in the correct
direction observing the polarity symbols (+/-) and
replace the battery cover.
• While using the remote control, you should direct
it towards the front panel of the receiver. Remote
range is approximately 7m/23ft.
• If your receiver no longer responds to the remote
control. it is probable that the batteries are
exhausted. If so you can still use the local buttons
of the receiver. You can replace batteries after they
are exhausted.
NOTE: Remove the batteries from the remote
control when it is not to be used for a long
period. Otherwise it can be damaged due to
any leakage of batteries.
Connecting the Set Top Box to a TV Set
You can connect the set top box to your TV by
using the scart socket or HDMI input. Use a scart
or HDMI cable to connect the set top box to your
TV.
The set top box gives RGB or CVBS output from
scart or high de
fi
nition quality from HDMI output.
SCART (TV)
HDMI OUTPUT
USB
5V DC ,500mA
OPTICAL
AUDIO OUT
ANTENNA IN
ANTENNA OUT
ANALOG
AUDIO OUT
35029345
CI
LNB IN
13/18V Max.400 mA.
HDMI connection
SCART connection
01_TS7100_[GB]_DVB645_PVR_2712UK_10078521_50216711.indd Ksm1:7
05.04.2012 17:02:03
