WAGNER AquaCoat 5010 Translation Of The Original Operating Manual Download Page 49

Page: 49 / 160

OPERATING MANUAL

EDITION 02/2016

ORDER NUMBER DOC 2366600

6.5.4

PRODUCT SUPPLY

Impurities in the spraying system!

Spray gun blockage, products harden in the spraying system.

Flush the spray gun and paint supply with a suitable fl ushing agent.

NOTICE

Bursting hose, bursting threaded joints!

Danger to life from injection of product.

Ensure that the hose material is chemically resistant to the

sprayed products.

Ensure that the spray gun, threaded joints and product hose

between the device and the spray gun are suitable for the
pressure generated in the device.

Ensure that the following information can be seen on the high-

pressure hose:

Manufacturer

- Permissible operating pressure

- Date of manufacture

DANGER

WARNING

Electrical discharges!

Danger due to electrically charged product lines.

The conductive sheath of the product hose must not be
removed and the connections to the ground potential must not
be loosened:
- Gun side: Do not disconnect the product hose from the hose

holder.

- Cabinet side: Do not loosen the cabinet's knurled nut and

the grounding cable in the cabinet.

Summary of Contents for AquaCoat 5010

































































































































































Search results

Summary of Contents for AquaCoat 5010

Reviews:

Related manuals for AquaCoat 5010

Brands by name

Popular brands

WAGNER AquaCoat 5010, Translation Of The Original Operating Manual

Search results

Summary of Contents for AquaCoat 5010

Reviews:

Related manuals for AquaCoat 5010

Brands by name

Popular brands