WAGNER AquaCoat 5010, Translation Of The Original Operating Manual

Page: 105 / 160

105
4
5
B_05886
SW9
27
25
B_05883
SW19
SW19
OPERATING MANUAL
EDITION 02/2016 ORDER NUMBER DOC 2366600
Valve needle assembly tool,
Order No. 2309368
Valve tip (27)
Loosen valve tip by hand using
the valve needle assembly tool
(Order No. 2309368).
Clamping screw assembly tool,
Order No. 2325263
Valve housing : Use an assembly tool or socket or ring spanner
(no open-end wrench).
Do not tilt the product hose , but pull it
straight out in the direction of arrow.
At the same time, execute slight rotational
movements.
Fitting (25)
If the fi tting (25) does not come out with the product hose, it must be removed from the
gun adapter as follows:
- Screw the wood screw ( 3 mm; 0.12 inches, length 40 mm; 1.6 inches) into the fi tting (25),
max. 6 mm deep.
- Pull out straight with suitable pliers. Possibly rotate clockwise simultaneously.
- Thereafter, the fi tting must be replaced.
If the fi tting is broken in the gun adapter, WAGNER Service must be contacted.
Carefully release the
cascade without pliers