WAGNER AquaCoat 5010, Translation Of The Original Operating Manual

Page: 9 / 160

9
OPERATING MANUAL
EDITION 02/2016 ORDER NUMBER DOC 2366600
1.5
TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL
Cleaning Manual cleaning of devices and device parts with cleaning agent
Flushing Internal fl ushing of paint-wetted parts with fl ushing agent
Staff qualifi cations
Trained person Is instructed in the tasks assigned to him/her, the potential risks
associated with improper behavior as well as the necessary
protective devices and measures.
Electrically trained
person Is instructed by an electrician about the tasks assigned to him/her,
the potential risks associated with improper behavior as well as
the necessary protective devices and measures.
Electrician Can assess the work assigned to him/her and detect possible
hazards based on his/her technical training, knowledge and
experience in relevant provisions.
Skilled person A person who, based on his/her technical training, experience and
recent vocational experience, has suffi
cient technical knowledge
and is familiar with the relevant and generally accepted rules of
technology so that he/she can inspect and assess the status of
devices and coating systems based on workplace safety.
In the context of
TRBS 1203
(2010 / Revision 2012)
Additional requirements for skilled persons are given in the
TRBS 1203 (2010/Revision 2012): Expert knowledge in the areas
of protection against excessive pressure, electrical hazards, and
explosion protection (where applicable).
1.4
ABBREVIATIONS
Order No. Order number
Spare part
Marking in the spare parts lists
AirCoat
AirCoat electrostatic, water-based
Manual gun
High voltage
HP High pressure
Stainless steel
Ultra high molecular weight polyethylene
PTFE with graphite
Position
Number of pieces
Wrench size
LV Low viscosity
HV High viscosity