WAGNER AquaCoat 5010, Translation Of The Original Operating Manual

Page: 19 / 160

19
OPERATING MANUAL
EDITION 02/2016 ORDER NUMBER DOC 2366600
4.2.6
TOUCHING HOT SURFACES
Only touch hot surfaces if you are wearing protective gloves.
When operating the device with a coating product with a temperature of > 43 °C; 109 °F:
identify the unit with a warning label that says "Warning - Hot Surface".
- Instruction label Order no. 9998910
- Protection label Order no. 9998911
Note: Order the two stickers together.
4.2.5
HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS
When preparing or working with lacquer and when cleaning the device, follow the
working instructions of the manufacturer of the lacquers, solvents and cleaning agents
being used.
Take the specifi ed protective measures. In particular, use personal protective equipment:
safety goggles, protective clothing and gloves, as well as respiratory protection and
skin protection cream if necessary.
Use a mask or breathing apparatus if necessary.
For suffi
cient health and environmental safety: Operate the device in a spray booth or
on a spraying wall with the ventilation (extraction) switched on.
Wear suitable protective clothing when working with hot products.
4.4
SAFETY-RELEVANT INFORMATION ABOUT DISCHARGES
The plastic parts of the cabinet are charged electrostatically by the high-voltage fi eld.
Contact with plastic parts harmless discharges (brush discharges) may occur. They are
completely non-hazardous for human health.
4.3
PROTECTIVE AND MONITORING EQUIPMENT
Protective and monitoring equipment must not be removed, modifi ed or rendered
unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment, the system must not
be operated until these defects are remedied.