WAGNER AquaCoat 5010 Translation Of The Original Operating Manual Download Page 62

Page: 62 / 160

OPERATING MANUAL

EDITION 02/2016

ORDER NUMBER DOC 2366600

7.2.4

GENERAL RULES FOR MAKING ADJUSTMENTS TO THE SPRAY GUN

High-voltage fi eld!

Danger to life from malfunction of heart pacemakers.

Make sure that persons with pacemakers:

Do not work with the electrostatic spray gun.
Do not enter the high-voltage area.

DANGER

High-pressure spray jet!

Danger to life from injecting paint or solvent.

  Never reach into the spray jet.
  Never point the spray gun at people.
  Consult a doctor immediately in the event of skin injuries caused

by paint or solvent. Inform the doctor about the paint or solvent
used.

Never seal defective high-pressure parts; instead relieve the pressure

from them and replace them.

Wear the appropriate protective clothing, gloves, eyewear and

respiratory protection.

WARNING

Summary of Contents for AquaCoat 5010

































































































































































Search results

Summary of Contents for AquaCoat 5010

Reviews:

Related manuals for AquaCoat 5010

Brands by name

Popular brands

WAGNER AquaCoat 5010, Translation Of The Original Operating Manual

Search results

Summary of Contents for AquaCoat 5010

Reviews:

Related manuals for AquaCoat 5010

Brands by name

Popular brands