WAGNER AquaCoat 5010, Translation Of The Original Operating Manual

Page: 5 / 160

5
OPERATING MANUAL
EDITION 02/2016 ORDER NUMBER DOC 2366600
7.3 Working 64
7.3.1 Checking the Spray Pattern (Without Electrostatics) 64
7.3.2 Starting the System 66
7.3.3 Spraying 67
7.3.4 Pressure Relief/Work Interruption 68
7.3.5 Flushing Out Clogged Round Jet Nozzles 69
7.3.6 Replacing Round Jet Nozzle's Nozzle Insert 69
7.3.7 Changing from AirCoat Round Jet to AirCoat Flat Jet 70
7.3.8 Replacing the AirCoat Flat Jet Nozzles 73
7.3.9 Cleaning of the Nozzle Parts 73
7.3.10 Eliminate Nozzle Clogging 74
7.3.11 VM 5020W Control Unit Start Up 76
7.3.12 Setting and Saving Recipes 77
7.3.13 Setting the High Voltage 78
7.3.14 Setting the Current Limitation 79
7.3.15 Display During Spraying 80
7.3.16 Standby Mode 81
7.3.17 Operating Hours Counter/Service Display 82
7.3.18 Service Display Setup 83
7.3.19 "Carry Out Service" Display 84
7.4 Device Confi guration 85
7.4.1 Overview of Parameters 85
7.4.2 Access to the Device Confi guration Mode 86
7.4.3 Setting Example "Parameter C13" 87
7.5 External Interface 89
8 CLEANING AND MAINTENANCE 91
8.1 Cleaning 91
8.1.1 Cleaning Staff 91
8.1.2 Safety Instructions 91
8.1.3 Flushing and Cleaning the System 92
8.2 Maintenance 94
8.2.1 Maintenance Staff 94
8.2.2 Safety Instructions 94
8.2.3 Safety Checks 95
8.2.3.1 Grounding Check 95
8.2.3.2 Inspecting the Safety Elements 95
8.2.3.3 Product Hoses, Tubes and Couplings 96
8.2.4 Changing the Spray Gun With Hose Set 97
8.2.5 Changing the Product Hose and/or Air Hose 98
8.2.6 Cleaning and Replacing the Filter 98
9 TROUBLESHOOTING AND RECTIFICATION 99
9.1 Error Displays at the VM 5020W Control Unit 99
9.2 Faults in the System 101
10 REPAIR WORK 102
10.1 Repair Personnel 102
10.2 Safety Instructions 102
10.3 Mounting Materials 103
Table of Contents