Wacker Neuson RTLx-SC3, Operator'S Manual

Page: 65 / 186

Maintenance
Periodic Maintenance Schedule 7.1
65
[en-US] | 09/2022 | 5100061327 | RTLx-SC3 | Operator’s Manual
7 Maintenance
7.1 Periodic Maintenance Schedule
Maintenance cycle Personnel For further information
Daily Operating personnel [
}
65] Checking the Hydraulic Oil Level
[
}
69] Checking for Loose or Missing Fasteners
[ } 69] Checking the Receiving Eyes
[ } 70] Cleaning SmartControl™ Transmitter
100 hours Operating personnel [ } 66] Maintaining the Battery
[ } 69] Lubricating the Articulated Joint and Steering
Cylinders
[ } 71] Draining the Fuel and Water Separator
300 hours Operating personnel [ } 71] Inspecting the Shock Mounts
1000 hours Service personnel [ } 67] Changing the Hydraulic Oil and Filter
As needed Operating personnel
[
}
66]
Maintaining the Battery
[
}
70]
Adjusting the Scraper Bars
[
}
72] Priming the Fuel System
Maintenance personnel [
}
82] Machine Disposal and Decommissioning
7.2 Checking the Hydraulic Oil Level
NOTICE
Low levels of hydraulic oil may cause damage to hydraulic components.
► If hydraulic oil continually needs to be added, inspect the hoses and
connections for possible leaks. Repair any leaks immediately.
► Do not attempt to remove the vent cover from the hydraulic reservoir.
When
Daily
Requirements
Location
A hydraulic oil level sight glass (1) is located on the side of the hydraulic fluid
reservoir inside the rear section of the machine.
7