Wacker Neuson RTLx-SC3, Operator'S Manual

Page: 11 / 186

Foreword
Machine Documentation 1.2
11
[en-US] | 09/2022 | 5100061327 | RTLx-SC3 | Operator’s Manual
1.2 Machine Documentation
Keep a copy of the operator’s manual with the machine at all times.
From this point forward in this documentation, Wacker Neuson America Cor-
poration will be referred to as Wacker Neuson or the manufacturer.
For spare parts information, please see your Wacker Neuson dealer, or visit
the Wacker Neuson website at http://www.wackerneuson.com/.
When ordering parts or requesting service information, be prepared to pro-
vide the machine model number, item number, and serial number.
1.3 Expectations for Information in This Manual
This manual provides information and procedures to safely operate and
maintain this machine. For your own safety and to reduce the risk of injury,
carefully read, understand, and observe all instructions described in this
manual.
The manufacturer expressly reserves the right to make technical modifica-
tions, even without notice, which improve the performance or safety stan-
dards of its machines.
The information contained in this manual is based on machines manufac-
tured up until the time of publication. The manufacturer reserves the right to
change any portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to the manufac-
turer’s factory-installed components. Your machine may vary depending on
the requirements of your specific region.
1.4 Manufacturer’s Approval
This manual contains references to approved parts, attachments, and modi-
fications. The following definitions apply:
• Approved parts or attachments are those either manufactured or pro-
vided by the manufacturer.
• Approved modifications are those performed by an authorized service
center according to written instructions published by the manufacturer.
• Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
• Serious injury hazards to the operator and persons in the work area
• Permanent damage to the machine which will not be covered under war-
ranty
Contact your dealer immediately if you have questions about approved or
unapproved parts, attachments, or modifications.
1