Wacker Neuson EZ17 Operator'S Manual Download Page 182

Page: 182 / 256

7-36

OM EZ17 us 1.0 * ez17w700.fm

Cleaning the radiator

CAUTION

Burn hazard when performing maintenance on the radiator!

The hot radiator can cause burns.

►

Stop the engine and let it cool down.

►

Wear protective equipment.

NOTICE

Damage to diesel engine and hydraulic system due to dirt on the radiator.

►

Check and if necessary clean the radiator once a day.

►

In dusty or dirty work conditions, clean more frequently than indicated
in the maintenance plans.

NOTICE

Damage to radiator fins during cleaning.

►

Keep a safe distance from the radiator during cleaning.

►

Use oil-free compressed air (2 bar/29 psi max.) to clean.

Radiator

and the hydraulic oil cooler

are located in the engine

compartment.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Remove the right-hand cover.

3. Remove dust and other foreign bodies from the fins with compressed

air.

4. Install the right-hand cover.

Fig. 202

Summary of Contents for EZ17

































































































































































































































































Search results

Summary of Contents for EZ17

Reviews:

Related manuals for EZ17

Brands by name

Popular brands

Wacker Neuson EZ17, Operator'S Manual

Search results

Summary of Contents for EZ17

Reviews:

Related manuals for EZ17

Brands by name

Popular brands