Wacker Neuson EZ17, Operator'S Manual

Page: 100 / 256

5-18
OM EZ17 us 1.0 * ez17b510.fm
5
Stabilizer blade
WARNING
Crushing hazard due to unintentional actuation!
Unintentional actuation can cause serious injuries or death.
►
Raise the control lever base.
►
Lower the stabilizer blade to the ground once work is over.
►
Ensure that no one is in the danger zone.
The lever is located at the left under the seat.
1. Set the lever to position A .
2. The stabilizer blade gear is controlled via lever 10 .
Information
Lowering the stabilizer blade too deeply into the ground can create a high
resistance.
►
Slightly raise the stabilizer blade.
►
The clearance between the stabilizer blade and the ground should be
about 1 cm (0.4 in).
►
Raise the stabilizer blade before starting machine travel.
Information
The stabilizer blade is also used as a parking brake.
►
Press the stabilizer blade against the ground.
A
B
Fig. 97
Position Function
A The stabilizer blade function is set in this position.
B The telescopic travel gear function is set in this position.
1
2
10
Fig. 98
Position Function
1 Lowers the stabilizer blade.
2 Raises the stabilizer blade.