Wacker Neuson EZ17, Operator'S Manual

Page: 15 / 256

OM 28Z3 us – Edition 2.0.1 * Sicherheit(us).fm
2-3
2.4 Preparing to use the machine
Conditions for use
• The machine has been designed and built in accordance with state-of-
the-art standards and recognized safety regulations. Nevertheless, its
use can constitute a risk to the operator or to third parties, or cause
damage to the machine and to other material property.
• Read and follow this Operator’s Manual and other manuals that
accompany the machine.
• The machine must only be used in accordance with its designated use
and the instructions set forth in this Operator’s Manual.
• The machine must only be used by qualified operators who are fully
aware of the risks involved in operating the machine.
• Do not start, move or operate a damaged or malfunctioning machine.
Any mechanical dysfunctions, especially those affecting the safety of
the machine, must be repaired immediately. Only qualified technicians
shall determine how to move a damaged or malfunctioning machine to
a safe place for diagnoses and repair.
• The operator/machine owner commits himself to operate and keep the
machine in serviceable condition and, if necessary or required by law,
to require the operating or servicing persons to wear protective clothing
and safety equipment
Operator training and knowledge
• Always keep this Operator’s Manual and other manuals that
accompany the machine in their storage compartment provided in the
operator station on the machine. Immediately replace an incomplete or
illegible Operator’s Manual.
• All persons working on or with the machine must read and understand
the safety information in this Manual before beginning work. This
applies especially to persons working only occasionally on the
machine, such as performing set-up or maintenance tasks.
• Follow, and instruct the operator in, legal and other mandatory regula-
tions relevant to accident prevention and environmental
protection.These may include handling hazardous substances, issuing
and/or wearing personal protective equipment, or obeying traffic
regulations.
• The operator/machine owner must regularly ensure that all persons
entrusted with operation or maintenance of the machine are working in
compliance with this Operator's Manual and are aware of the risks and
safety factors of the machine.
Preparing for use
• Before starting up the machine, ALWAYS inspect the machine to make
sure that it is ready for safe work and travel operation.
• Wear close-fitting work clothes that do not hinder movement. Tie back
long hair and remove all jewelry (including rings).