Wacker Neuson EZ17, Operator'S Manual

Page: 151 / 256

OM EZ17 us 1.0 * ez17w700.fm
7-5
7
Information
Maintenance on or with the machine with the note Wacker Neuson
service center must only be performed by the trained and qualified
personnel of a Wacker Neuson service center.
Information
The maintenance meter starts at 500.0 hours. It counts down to 0.0 hours. A
wrench symbol flashes as soon as the maintenance meter reaches this value.
Every 1000 service hours or once a year (Wacker Neuson service center)
Hydraulic oil replacement --
Replacement of hydraulic oil reservoir breather filter --
Drive gearbox oil replacement --
Replacement of air filter elements
1
1. Air filter replacement according to the dirt indicator, every 1000 s/h or once a year at the latest. (Replace after 50 s/h when in extensive use in environments
with acidic air, such as acid production facilities, steel and aluminium mills, chemical plants and other nonferrous-metal plants, independently of the dirt indi-
cator)
--
Check the pilot control filter for dirt, clean it if necessary --
Check valve clearance, adjust if necessary --
Pressure check of primary pressure limiting valves --
Check the battery condition (charge condition, terminals etc.) --
All steps for maintenance once a day and once a week (and all steps for maintenance at
500 service hours)
7-2 , 7-4
Option
Wear of load hook and joint rod (check at least once a year) --
Every 1500 service hours (Wacker Neuson service center)
Check the injection nozzles and clean and test them if necessary --
All steps for maintenance once a day and once a week (and all steps for maintenance at
500 service hours)
7-2 , 7-4 , 7-5
Every 2000 service hours or every 2 years (Wacker Neuson service center)
Coolant replacement --
Check the bladder type accumulator --
All steps for maintenance once a day and once a week (and all steps for maintenance at
500 and 1000 service hours)
7-2 , 7-4 , 7-5 , 7-5