Wacker Neuson ET35, Operator'S Manual

Page: 199 / 302

BA E16 en* 1.0 * E16_10_700.fm
7-5
Maintenance 7
Check the seat belt for damage --
Check the hydraulic hoses for damage --
Check the load hook, joint rod and lifting eyes --
Check the hydraulic quickhitch (Easy Lock) for damage --
Check the Powertilt for damage --
Weekly maintenance (every 50 operating hours) (operator) Page
Check accesses and exits for dirt --
Change the air filter
1
--
Actuate the Powertilt swivel device in the limit positions in both flow direc-
tions for one minute each to rinse the system
3
--
Lubricate the vehicle according to the lubrication schedule
7-9
All steps for maintenance intervals once a day
--
1. Air filter replacement according to the dirt indicator, every 1000 o/h or once a year at the latest. (Replace after 50 o/h when in extensive use in environments
with acidic air, such as acid production facilities, steel and aluminum mills, chemical plants and other nonferrous-metal plants, independently of the dirt indi-
cator; Contact an authorized service center.
2. Check the threaded fittings and corresponding components/assemblies visually or manually (without using tools) for tightness. Replace the threaded fitting in
case of irregularities. Pay attention to adhesive connections as you do so.
3. Flush out the system to flush out contaminants. Repeat the procedure in the opposite flow direction.
Daily maintenance (operator)