Wacker Neuson ET35, Operator'S Manual

Page: 103 / 302

BA E16 en* 1.0 * E16_10_400.fm
4-39
Putting into operation 4
Starting and stopping the engine
Fold up the joystick base after shutting off G the engine.
All hydraulic functions are locked if the control lever is raised with a
running engine.
Functional check of the joystick base
Before starting work, perform a functional check of the control lever base.
1. Start the vehicle.
2. Fold the control lever base
G down.
3. Perform vehicle travel on open terrain.
4. Secure the danger zone.
5. Stop the vehicle.
6. Raise the control lever base
G .
7. Move all control levers and pedals in all directions.
➥
The selected elements do not move:
➥
Work may be performed with the vehicle.
➥
The selected elements move:
➥
Stop operation immediately.
Contact a Wacker Neuson service center and have the malfunction
rectified.
Fig. 112
G
Joystick base tier
III
Effect
Raised The engine can be started.
Lowered The engine cannot be started.
Fig. 113
G
Joystick base tier
IV
Indication Effect
Raised The engine can be started
Lowered The engine cannot be started