Wacker Neuson E 2200, Operator'S Manual

Page: 6 / 132

6
wc_bo0192779en_001TOC.fm
Table of Contents E 2200, E 3000ES
4.18 Stopping the Machine Temporarily ......................................................51
4.19 Rewinding the Hoses ..........................................................................52
4.20 Shutting Down and Packing Up the Machine ......................................54
4.21 Resetting a Low HTF Level Fault ........................................................55
4.22 Quick-Connect Coupling Usage and Care ..........................................58
4.23 Resetting the Snap Switch ..................................................................59
4.24 Burner Controller Periods and Modes .................................................60
5 Accessories 65
5.1 Available Accessories .........................................................................65
5.2 Connecting the HX 200 or HX 60 HEAT XCHANGER™ ....................66
5.3 Connecting the HX 100 or HX 30 HEAT XCHANGER™ ....................68
5.4 Connecting the HX 50 or HX 15 HEAT XCHANGER™ ......................70
5.5 Combining the Machine with One HHS and One DPP ........................72
5.6 Combining the Machine with Two HHS and Two DPP (E 2200 only) .74
5.7 Mounting the Auxiliary Pump Panel ....................................................76
6 Burner Setup 77
6.1 Adjusting the Burner Electrodes ..........................................................80
6.2 Replacing the Burner Nozzle ...............................................................83
6.3 Setting the “Z” Distance on V1-Style Heads ........................................86
6.4 Adjusting the Air Settings ....................................................................88
6.5 Setting the Fuel Pressure ....................................................................89
7 Maintenance 91
7.1 Periodic Maintenance Schedule ..........................................................91
7.2 Repairing a Hose .................................................................................92
7.3 Inspecting the HTF System and the Fuel System ...............................94
7.4 Inspecting Electrical Cords ..................................................................95
7.5 Filling the HTF Reservoir .....................................................................96
7.6 Cleaning the HTF Strainer ...................................................................98
7.7 Replacing the Fuel Filter ...................................................................100
7.8 Lubricating the Hose Reel System ....................................................101
7.9 Cleaning the Turbulators and the Exhaust Ducting ...........................102
7.10 Inspecting/Replacing the Rope Gasket .............................................104
7.11 Storing the Machine ..........................................................................105
7.12 Preparing the Machine for Seasonal Operation ................................106