Foreword
wc_tx001665gb.fm
3
Foreword
Machines
covered by
this manual
This manual covers machines with the following item numbers:
Machine
documentation
Keep a copy of the Operator’s Manual with the machine at all times.
Use the separate Parts Book supplied with the machine to order replacement
parts.
If you are missing any of these documents, please contact Wacker Neuson
Corporation to order a replacement or visit www.wackerneuson.com.
When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Expectations
for
information in
this manual
This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
Wacker Neuson Corporation expressly reserves the right to make technical
modifications, even without notice, which improve the performance or safety
standards of its machines.
The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson Corporation reserves the right
to change any portion of this information without notice.
Manufacturer’s
approval
This manual contains references to
approved
parts, attachments, and
modifications. The following definitions apply:
Approved parts or attachments
are those either manufactured or provided by
Wacker Neuson.
Approved modifications
are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wacker
Neuson.
Unapproved parts, attachments, and modifications
are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
Serious injury hazards to the operator and persons in the work area
Permanent damage to the machine which will not be covered under warranty
Contact your Wacker Neuson dealer immediately if you have questions about
approved or unapproved parts, attachments, or modifications.
Machine
Item Number
Revision
E 2200
0620176
105 and above
E 2200
0620215
105 and above
E 2200G
0620216
110 and above
E 2200G
0620226
110 and above
E 3000ES
0620967
100 and above
E 3000ES-G
0620968
100 and above
Summary of Contents for E 2200
