Wachs WS-8460, User Manual

Page: 39 / 96

Chapter 3, Operating Instructions: Performing the Cut
E.H. Wachs Part No. 10-010-MAN, Rev. 1-0310 35
Figure 3-22. Set the clamping direction knob to
RETRACT.
7.
Push both clamping flow levers down simultaneously
until the clamp arms are fully open. The right (return
pressure) gauge reading will equal the system pres-
sure. Pull the clamping flow levers back up.
8.
Lift the machine off the pipe. Move it to the next cut-
ting location or bring it topside if you are finished.