Chapter 3, Operating Instructions: Performing the Cut
E.H. Wachs
Part No. 10-010-MAN, Rev. 1-0310
33
R
EMOVING
THE
M
ACHINE
1.
Set the feed direction knob on the TCP to REVERSE.
Figure 3-18. Set the feed direction knob to REVERSE.
2.
Push the feed flow lever down to open the feed circuit.
Figure 3-19. Push the feed flow lever down to supply
power to the feed drive.
3.
Push the feed speed knob down to 6.5 gpm (maximum
flow).
Summary of Contents for WS-8460
Page 2: ...Diamond Wire Saw User s Manual Part No 10 010 MAN Rev 1 0310 E H Wachs...
Page 18: ...Diamond Wire Saw User s Manual 14 Part No 10 010 MAN Rev 1 0310 E H Wachs A B C...
Page 22: ...Diamond Wire Saw User s Manual 18 Part No 10 010 MAN Rev 1 0310 E H Wachs...
Page 40: ...Diamond Wire Saw User s Manual 36 Part No 10 010 MAN Rev 1 0310 E H Wachs...
