Diamond Wire Saw User’s Manual
6
Part No. 10-010-MAN, Rev. 1-0310
E.H. Wachs
The WS-8460 has four feed
rails, as shown below. The
other models have three rails.
Figure 1-2. The saw bow moves on three feed rails on
the frame. The feed screw along the center rail drives
the bow.
Figure 1-3. The feed system components are shown.
The feed block is attached to the saw bow.
The top of the feed screw has a drive nut to allow the feed to
be operated manually, and a clutch in the top coupling dis-
engages the feed screw if the feed drive jams or reaches the
end of travel.
NOTE
Feed rails
Feed rails
Saw bow
Feed screw
Feed block
Feed screw
Feed motor
Drive chain
Manual feed nut
Summary of Contents for WS-8460
Page 2: ...Diamond Wire Saw User s Manual Part No 10 010 MAN Rev 1 0310 E H Wachs...
Page 18: ...Diamond Wire Saw User s Manual 14 Part No 10 010 MAN Rev 1 0310 E H Wachs A B C...
Page 22: ...Diamond Wire Saw User s Manual 18 Part No 10 010 MAN Rev 1 0310 E H Wachs...
Page 40: ...Diamond Wire Saw User s Manual 36 Part No 10 010 MAN Rev 1 0310 E H Wachs...
