Diamond Wire Saw User’s Manual
34
Part No. 10-010-MAN, Rev. 1-0310
E.H. Wachs
Figure 3-20. Push the feed speed knob down to the
maximum setting.
It will take about 30 minutes
to retract the feed drive on a
36 inch pipe.
4.
When the saw bow is back at its home position, pull
the feed flow lever up to stop the feed drive.
Figure 3-21. Pull the feed flow lever up to turn off the
feed drive.
5.
Rig the shackles to the overhead lift. Lift just enough
to put tension on the chains and secure the machine.
6.
Push the clamping direction knob to the RETRACT
position.
NOTE
Summary of Contents for WS-8460
Page 2: ...Diamond Wire Saw User s Manual Part No 10 010 MAN Rev 1 0310 E H Wachs...
Page 18: ...Diamond Wire Saw User s Manual 14 Part No 10 010 MAN Rev 1 0310 E H Wachs A B C...
Page 22: ...Diamond Wire Saw User s Manual 18 Part No 10 010 MAN Rev 1 0310 E H Wachs...
Page 40: ...Diamond Wire Saw User s Manual 36 Part No 10 010 MAN Rev 1 0310 E H Wachs...
