Wachs EP 424, User Manual

Page: 85 / 122

Chapter 5, Operating Instructions: Single Point Operation
E.H. Wachs Part No. 81-MAN-00, Rev. 0-0610 81
Figure 5-75. Remove the trip assembly.
8.
Replace the rotating tool head on the main shaft. Align
the 3 dowel pins in the head with the holes in the shaft,
and press the head into place.
Figure 5-76. Align the dowel pins in the rotating head
(indicated by arrows) with the holes in the main shaft,
and press the head onto the shaft.
9.
Using a 5/16” hex wrench, tighten the 6 captivated
screws in the rotating head to secure it to the main
shaft.