Wachs EP 424, User Manual

Page: 80 / 122

EP 424 End Prep Machine
76 Part No. 81-MAN-00, Rev. 0-0610 E.H. Wachs
Figure 5-68. Set the left knob stop against the Speed
Prep knob.
3.
Loosen the Speed Prep knob and set it to the location
of the transition angle. Lock the knob in place.
4.
Move the right knob stop up against the knob and
tighten it.
Figure 5-69. Set the right knob stop.
5.
Set the Speed Prep knob back to the starting angle
position and lock it in place.
6.
Measure and mark the transition point on the pipe face
surface.