Wachs EP 424, User Manual

Page: 71 / 122

Chapter 5, Operating Instructions: Single Point Operation
E.H. Wachs Part No. 81-MAN-00, Rev. 0-0610 67
Figure 5-57. Tighten the captivated screws in the 6
holes to attach the single-point slide to the main shaft.
10.
If you want to install the mandrel before mounting the
machine on the workpiece, insert the threaded end of
the mandrel through the single-point slide. You may
have to turn the mandrel slightly while pushing it to
engage the spline.
Figure 5-58. Insert the mandrel through the single-
point slide.
11.
Turn the feed handle clockwise to engage the threads
of the mandrel into the feed nut. Turn the handle until