EP 424 End Prep Machine
12
Part No. 81-MAN-00, Rev. 0-0610
E.H. Wachs
tions. Tooling is available for facing, single-angle beveling,
compound beveling, counterboring,
The form tool configuration will perform end prepping (fac-
ing, beveling, J-prepping, and counterboring), with the
operator manually feeding the tool head.
Figure 3-1. The photo shows the form tool configura-
tion of the machine with the standard self-centering
mandrel.
Single-Point Configuration
The single-point machine is provided with a tool slide that
feeds the tool radially across the face of the pipe or flange.
The slide is driven by a starwheel that engages trips on a
ring mounted to the machine housing. Bevels are performed
using the Speed Prep auto-feed system, which automatically
feeds the machine axially as it cuts.
The single-point machine will perform facing or beveling of
thick-walled pipes and flanges.
Summary of Contents for EP 424
