VWR International MU 6100 H, Instruction Manual

Page: 72 / 96

Transmitting data (USB interface) MU 6100 H
72
ba77077e02 09/2014
12 Transmitting data (USB interface)
12.1 Options for data transmission
Via the USB interface you can transmit data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data Control Operation / description
Current datas-
ets of the sen-
sors indicated
on the display Manual  With <F2> / [USB output] .
 Simultaneously with every manual
data storage process (see section
11.1 M
ANUAL STORAGE
, page 66).
Automatic, at
intervals  With <F2
_
> / [USB output] .
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic data storing process (see
section 11.2 A
UTOMATIC DATA
STORAGE AT INTERVALS
, page 67).
Stored mea-
sured values Manual  Displayed dataset with <F2> [USB
output] after calling up from the
memory.
 All datasets with the Output to USB
function.
(see section 11.3.1 E
DITING THE
MEASUREMENT DATA MEMORY
, page
69).
Calibration
records Manual  Calibration record with <F2> / [USB
output]
(see section 6.2.6 C
ALIBRATION
DATA
, page 36).
Automatic  At the end of a calibration proce-
dure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2> [USB output] key generally outputs the display
contents to the interface (displayed measured values, measure-
ment datasets, calibration records).