VWR International MU 6100 H, Instruction Manual

Page: 17 / 96

MU 6100 H Operation
ba77077e02 09/2014
17
5 Operation
5.1 General operating principles
5.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g.
<OK> ) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g.
<OK
_
> ).
<F1> :
<F1
_
> :
<F2> :
<F2
_
> :
Softkeys providing situation dependent functions, e.g.:
<F2> /[USB output]:
Outputs data to the USB interface
<F2
_
> /[USB output]:
Configures the automatic data output to the USB inter-
face
<On/Off> : Switches the meter on or off
<MODE> : Selects the measured parameter / Quits the settings
<CAL> :
<CAL
_
> :
Calls up the calibration procedure
Displays the calibration data
<STR> :
<STR
_
> :
Saves a measured value manually
Opens the menu for the automatic save function
<RCL> :
<RCL
_
> :
Displays the manually stored measured values
Displays the automatically stored measured values
<

><

> :
<  _><  _>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
<OK> :
<OK
_
> :
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<HOLD> Freezes the measured value (HOLD function)